Talk:Virtual designs into physical objects/Fab Labs

From AdCiv
< Talk:Virtual designs into physical objects
Revision as of 23:52, 25 April 2010 by Balatro (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

RepLab project status

Please add any open-source projects not covered here.

TOOL STATUS OF OPEN DESIGN
3D printer Complete. RepRap printer
CNC torch table, router Prototype
Drill-mill-lathe Complete. The MultiMachine
Welding table Complete
MIG Welder Not yet available
Plasma Cutter Two designs available. See here
Induction Furnace for melting scrap metal Incomplete. See Open Source Ecology's wiki
Metal casting, rolling
CNC laser cutter Complete
Metal press, shear, and hole puncher
Cold cut metal saw Can be attached to any motor
Oscilloscope Pocket-sized open-source oscilloscope available. May need to be adapted for the RepLab.
Programmable robotic arm with six degrees of freedom None available. One with five degrees of freedom (and a few bugs) here
Spectroscope None available
Retrieved from "http://adciv.org/wiki/index.php?title=Talk:Virtual_designs_into_physical_objects/Fab_Labs&oldid=7663"